Please click on the name of the Instrument to
view it.
- Sasmira
stiffness tester is used to measure stiffness of fabrics.
- Conforms
to national & international specifications like IS
6490-1971.
- The
results are expressed in terms of bending length,
which in turn could be used to calculate flexural
rigidity and bending modulus of fabrics.
- The
instrument is compact and portable.
- Easy
to operate.
|
- Sasmira
Crease Recovery Tester is used for rapid determination
of crease resistance of fabrics.
- The
instrument is developed to international specifications
(IS 4681-1981, BS 3086 – 1972).
- The
results are expressed in terms of crease recovery
angles under specified loading and recovery conditions.
- Simple
and compact
- Acrylic
plates and suitable weights provided for loading.
- Mounted
on a sturdy base.
|
- Sasmira
Yarn Appearance Winder is designed for rapid inspection
of non-uniformity in yarns.
- The
instrument is designed to international specifications,
ASTMD 2255 1979.
- The
appearace of the wrap board after wrapping the yarn
is compared directly with ASTM standard photograph.
The quality of the yearn is thus judged in an objective
way
- Change
over for different wraps/inch in case of different
counts by simple shifting of the belt.
- Sturdy
Metallic base to avoid vibration.
- Motorised
model also available
|
- Sasmira
Launderometer is used for evaluating colour fastness
to washing of the dyed and printed textiles.
- The
instrument is designed to follow a number of standard
procedures (ASTM D3557, AATCC 107-1975)
- Unit
comes with 8 SS Jars of 500 ml. Capacity And gaskets.
- Entire
spider assembly made of non-corrosives Stainless steel.
- Spring
lock arrangement for fixing the jars.
- Electric
motor with reduction gear to give 40-+ 2 rpm.
- 70
ltr. Capacity stainless steel bath.
- Proper
inlet and drains provided.
- Digital
temperature controller.
- Adjustable
timer controller.
|
- Sasmira
Twist tester is used to determine the direction and
amount of twist in yarn.
- Conforms
to ASTM D-1422-76.
- Suitable
for both single and double yarn.
- Sturdy
metallic base.
- Four
digit electronic display.
- Autostop
and counter arrest facility for single yarn test.
- Tension
range 1-100 gms to cover all counts.
|
- Sasmira
Crimp Rigidity Tester is used to determine the bulking
potential of texturised yarns.
- The
instrument is based on HATRA+ test method.
- The
tester can be used for both polyamide and polyester
texturised yarns.
- Instrument
mounted on a sturdy metal base. Compact and portable.
- Heating
arrangement for measurement of hot Crimp contraction.
|
- Sasmira
crimp tester is used to measure percentage crimp in
yarns. It can also be used for measuring
- The
instrment mounted on a sturdy base
- Tension
range of 0-35 Gms. Additional weights provided for
extending the range to 0-175 Gms.
|
- Sasmira
wrap reel is used for preparing leas to determine
count and leas strength of the yarns.
- The
instrument conforms to ASTM standard D1578.
- Motorised
using an electric motor. Arrangement for making 6-12
leas at a time.
- Circumference
of the reel 54".
- Select
switch for 80 rev. or 40 rev.
- Yarn
tensioning device using sliding arrangement.
-
Autostop.
|
- Sasmira
Crock Meter is used for rapid determination of fastness
of dyed and printed textiles to dry and wet rubbing.
- The
instrument conforms to AATCC B-1969, IS-766 – 1988
- Rubbing
finger of brass.
- A
four digit counter.
- A
sturdy aluminum base.
- Loading
arm moves mounted on ball bearings to minimise friction.
|
- Sasmira
Spray Tester is used for measuring the water repellent
efficiency of finishes applied to the fabric
-
In this test a small scale mock rain shower is produced
by pouring water through a spray nozzle.
- The
material is rated between 100 to 0 as per AATCC standards
for degree of wetting.
|
- Sasmira
Pilling Tester is used for rapid determination of
pilling of woven or knitted fabrics with soft spun
and filament yarns
- The
instrument is developed to international specifications.
- The
appearance of the test specimen is also compared with
standard samples to classify the fabrics for their
pilling resistance(ICI Standards).
- Light
weight wooden construction with a sturdy base
- A
preset counter provided for setting the number of
revolutions
|
- Sasmira
Hydrostatic Dome/head Tester is single unit intended
for determining for both water proofness of medium
and heavy fabrics such as tentage, water bags, tarpaulins,
etc. which have more water repulsive power, as well
as the resistance offered by a fabric to water penetration
under static pressure.
- Both
test values are determined in accordance with Indian
Standards and other specified Standards.
-
The base and dome are of non-corrosive metal.
- Both
hydrostatic head test and dome test perform with litter
modification.
- Over
flow tube provided for the head test.
|
- Sasmira
Thermal Conductivity Apparatus is essentially useful
for comparing the Thermal Insulation properties of
Materials.
- The
Apparatus is based on Niven’s Hot Plate method
- Guard
box provided to prevent radial heat loss.
- Temperature
of hot plate and Guard box controlled using Thermostats.
- Digital
display for temperature indication.
|
- Sasmira
Perspirometer+ is used for rapid determination of
colour fastness to perspiration of dyed and printed
textiles.
- The
instrument meets the need of equality woolmark scheme
for the international wool secretariat and conforms
to IS 971-1983.
-
The change in colour and staining is assessed as per
the international geometric grey scale of the staining
of white cotton/wool.
- Sturdy
non-corrosive SS frame with suitable loading device.
- 21
acrylic plates of dimensions 10 cms.x 4 cms.
- 2
units, 1 for acidic,1 for alkali.
|
Instrumentation
| List
of Instruments | Trade
Enquiries
|
